Mac Research
Mac How To

Fix macOS Monterey cannot be installed on macintosh HD

How to fix macOS Monterey cannot be installed on macintosh HD

About macOS Monterey cannot be installed on macintosh HD

MacOS Monterey cannot be installed on Macintosh HD is a Mac error that some users have experienced when trying to update to the latest macOS release. The macOS Monterey cannot be installed on Macintosh HD error prevents the installation of macOS Monterey.

Updating to a new version of macOS always has the potential to have some hurdles along the way, and the case with macOS Monterey is no different. If you’ve recently tried to update to this latest macOS release only to be met with the “macOS Monterey cannot be installed on Macintosh HD” message, then know that this is nothing surprising and, in most cases, there should be an easy fix for it. 

There could be numerous causes for the appearance of this error – for instance, there could be a bug in Monterey that would be patched out with the next update of the macOS, but it’s also possible that a problem with your Internet connection or your hard drive is triggering the error message. It’s also worth noting that if you are using a bootable USB drive to perform the installation of Monterey, a problem with the drive (for instance, the drive isn’t formatted correctly) could also be the cause for this problem.

There are quite a few methods that you can try in order to troubleshoot this problem, and we will explain in detail the ones that are most likely to help you. However, before you attempt any of the methods, it’s always a good idea to back up your data, so that you don’t accidentally lose any important files. Although the methods suggested below shouldn’t put your data at risk of getting lost, it’s better to be safe than sorry. Here is our guide on how to back up your Mac’s data – go ahead and use it if your important files haven’t already been backed up.

macOS Monterey cannot be installed on macintosh HD fix

The macOS Monterey cannot be installed on Macintosh HD fix methods are using Safe Mode, Disk Utility, or Recovery Mode. If nothing works, the ultimate macOS Monterey cannot be installed on Macintosh HD fix is to erase your Mac and perform a clean install.

Below, you will see detailed instructions for each of those methods – we suggest trying them out in the order they are shown, as we’ve organized them starting with the easier ones and moving on to the more complex and time-consuming methods.

Also, there are several things that you should check before trying anything else:

If none of those potential causes is what is triggering the error in your case, then proceed with the troubleshooting methods shown below:

Install macOS Monterey in Safe Mode

What you need to do here is simply restart your Mac in Safe Mode and try to perform the installation again. Depending on whether you are using an Intel Mac or an M1 Mac, the process of restarting in Safe Mode varies a bit.

Instructions for Intel Macs

  1. Shut down your Mac, press its Power button, and immediately press and hold Shift.
  2. Release the button once you see your Mac’s login screen.
  3. Log in to your Mac as normal – you may be asked to log in a second time. If you’ve successfully entered Safe Mode, you should see “Safe Boot” written in the top-right of either of the login screens. If you don’t see it, try again.
  4. Once in Safe Mode, try once again to install macOS Monterey. 

M1 Macs Fix

  1. Start with your Mac turned off and press and hold its Power button – release it once you see the Startup Options screen.
  2. Select your Mac’s startup disk, then hold down the Shift button, and click on Continue in Safe Mode.
  3. Log in to your Mac, and if asked to, log in a second time. Once you’be entered Safe Mode, you can try the macOS Monterey installation again.

Repair your Mac’s disk

The second thing you can try is to repair the disk from which your Mac starts and then try again to install macOS Monterey:

  1. Shut down your Mac and do either of the following:
    • Intel-based Macs: turn on the computer and immediately press and hold Command + R until you get to an Apple logo screen.
    • M1 Macs: with the Mac turned off, press and hold its Power button. Release the button when you see the Startup Options screen, select the Options icon, and click Continue.
  2. If asked to, select a user profile for which you know the password, click Next, and enter its password.
  3. Select Disk Utility in the Utilities screen.
  4. In Disk Utility, select View from the top and then click on Show All Devices.
  5. Now you must repair each volume, container, and disk (shown in the left sidebar) in this order: always start with the volumes first and end with the disks. The volumes are the ones shown at the bottom level of the hierarchy tree.

    Click the last volume of the last container of the disk you are repairing, then select First Aid from the top, and then select Run/Repair.

  6. After repairing the first volume, do the same thing with the other volumes, then with their containers, and finally repair the disks (again, in this last to first order).
  7. Once you’ve run the repair process on all volumes, containers, and disks, close the Disk Utility, click on the Apple Menu, and select Restart.
  8. When your Mac restarts, attempt the installation of Monterey one more time to see if it works now.

Install Monterey from macOS Recovery Mode

You can also use the Recovery Mode of your Mac to perform the installation of Monterey.

  1. Perform steps 1 and 2 from the previous method to get to the macOS Recovery Mode screen.
  2. Select the Reinstall macOS option and click Continue.
  3. Follow the on-screen prompts to complete the installation. Take note of the following guidelines:
    • If you are required to first unlock your Mac’s disk, enter your password to unlock it.
    • If the installer cannot find your Mac’s disk or tells you that it cannot install macOS Monterey on the disk, you will likely first need to erase your Mac (see below).
    • If you are given the option to choose between Macintosh HD and Macintosh HD – Data, choose the former.
    • Do not turn off or put to sleep your Mac until the installation finishes. Also, if you are using a MacBook, make sure that it is connected to a power source to avoid the risk of it accidentally running out of battery juice and shutting down.
    • Do not close the MacBook’s lid until the installation finishes.
    • After the installation is over, you might get to a setup screen. If you are selling or giving away your Mac, press Command + Q to quit it and thus allow its future owner to set it up themselves.

Erase your Mac

This final method should only be used as a last resort option in case the previous suggestions shown here didn’t allow you to install macOS Monterey on your Mac. Note that erasing/wiping clean your Mac would result in the deletion of all personal data that you have stored on it. For this reason, we once again remind you to back up your Mac before you proceed with this method. If you’ve already done that, or you don’t care about losing any of your data, you can proceed to our How to completely wipe a Mac guide, where you can find detailed instructions on erasing your Mac’s disk.

After you’ve erased your Mac, you can use the Install Monterey from macOS Recovery Mode method that’s shown above to perform a clean install of the latest macOS.

Exit mobile version